Husqvarna Viking Scandinavia 100 User Manual page 27

Maintenance
Care of the Machine
To keep your sewing machine operating
satisfactorily, it requires, like other precision
machines, regular cleaning. No lubrication
(oiling) is needed.
!
Turn off the main switch
Clean the Bobbin Area
Remove the presser foot and slide off the
bobbin cover. Lower the feed teeth. Place
the stitch plate opener on the brush, and
then in the recess at the rear of the stitch
plate. Turn toward you to pop off the stitch
plate. Clean the feed teeth with the brush.
Cleaning Under the Bobbin Area
When lint builds up, the area under the
bobbin case must be cleaned.
Remove the bobbin case holder (1) cover-
ing the front part of the bobbin case (2).
2.
Remove the bobbin case by lifting it up.
Clean with the brush.
Replace the bobbin case and the bobbin
case holder.
1.
Replacing the Stitch Plate
With feed teeth down, place the stitch plate
about 5 mm in front of the rear edge and
push it back. Slide on the bobbin cover.
Raise the feed teeth.
25