Placing The Bobbin In The Machine - Husqvarna Viking Scandinavia 100 User Manual

Placing the Bobbin in the
Machine
!
Turn off the main switch
1. Remove the bobbin cover by sliding it
towards you.
2. Place the bobbin in the bobbin case with
the mark facing up and the thread to
the left of the bobbin. The bobbin will
then rotate counter clockwise while pul-
ling out the thread.
3. Place your fi nger on the bobbin to keep
it from turning as you pull the thread
fi rmly to the right and then to the left into
the tension spring (a) until it ''clicks'' into
place.
4. Continue threading around (b) and to the
right of and then left into the thread cutter
(c). Replace the cover (1). Pull the thread
to the left to cut it (2).
10 15
b
a
Procedures
b
c
1
2
9