Reverse, Lowering The Feed Teeth - Husqvarna Viking Scandinavia 100 User Manual

Procedures
Reverse
Your machine sews backwards when the
stitch length dial is pressed. The machine
sews forward when the button is released.
For permanent reverse, turn the stitch length
dial to position .
Lowering the Feed Teeth
The feed teeth are lowered when you turn
the stitch length dial to . Turn the dial
to the left if you wish to raise the feed teeth.
The feed teeth will not come up until you
begin to sew.
The feed teeth are lowered when sewing
buttons and for free-hand work.
By lowering the feed teeth it is easier to get
thick garments under the presser foot. Do
not forget to raise the feed teeth before start-
ing to sew.
12