Related Manuals for FireAngel Thermoptek WST-630
Summary of Contents for FireAngel Thermoptek WST-630
- Page 1 User Manual WIRELESS INTERLINK SMOKE ALARM + 10 YEAR LIFE WST-630 Please read me – as I could save your life. Please retain this user manual for future reference...
- Page 2 Are you protected from deadly carbon monoxide? For a full range of carbon monoxide alarms visit www.fireangel.co.uk...
-
Page 3: Table Of Contents
TROUBLESHOOTING 1. Preparation DISPOSAL 2. Install Mounting Plate 3. Fit Your Smoke Alarm HOW TO MAKE YOUR 4. Test Your Smoke Alarm HOME SAFER INTERLINKING YOUR WST-630 WARRANTY SMOKE ALARMS RETURNS OPERATION PRODUCT RANGE Normal Condition Low Power Pack Condition... -
Page 4: Introduction
IMPORTANT: Your alarm will not work Up to a maximum of fifty WST-630 alarms can be wirelessly interlinked, creating a network. until it is correctly located and secured If any smoke alarm sounds, it triggers... -
Page 5: Application
Your smoke alarm typically meets the minimum requirements for family living units The FireAngel WST-630 is designed to be in existing buildings, as long as at least one wirelessly interlinked with other WST-630 unit is installed on each floor/level of your smoke alarms. -
Page 6: Positioning
Multi-family or mixed occupant residence (Tenancy building, student accommodation) Thermoptek™ smoke alarms are less prone Your FireAngel smoke alarm can also be used to false alarms from cooking fumes, and in individual flats and bedsits, providing the are therefore suitable for locations near same conditions are met as for a single-family kitchens. - Page 7 While the wireless range is over 200 metres in clear air / clear line of sight, the eff ective range may be reduced by wall and other Note: Up to fi fty WST-630 smoke alarms obstructions building. Always...
-
Page 8: Limitations
It may be interlinked with blocks of flats and hotels. The FireAngel a product from the FireAngel Wi-Safe 2 smoke alarm may not alarm before a fire... -
Page 9: How To Install Your Smoke Alarm
(if required). order to maximise your level of safety always test your smoke alarm frequently to ensure it is in full working order. Your FireAngel smoke alarm is only suitable for use in domestic/ residential applications as covered in this manual. -
Page 10: Fit Your Smoke Alarm
Therefore WST-630 alarms need to be “learned in” or interlinked in order to communicate with each other. If one alarm activates, all other interlinked smoke alarms will also sound. - Page 11 Alarm 2: The red LED on the wireless module of alarm 2 will flash to indicate that it has been “learned-in” successfully. Circular hole Note: If the test button is not pressed quickly enough (before the red LED on the wireless The red LED next to the learn button will flash module of Alarm 2 has extinguished), the briefly then light up for approximately five...
-
Page 12: Operation
Alarm condition Should your FireAngel smoke alarm enter a If the WST-630 goes into alarm, all interlinked low power pack condition, the unit will emit alarms will also sound 3 loud beeps which an audible ‘chirp’ approximately once every... -
Page 13: Wst-630 Led Indicators
LED red LED flash replace alarm immediately Note: The yellow LED may flash twice on the WST-630, indicating that the fault is with the wireless module. In this event, the complete WST-630 alarm should be replaced. -
Page 14: Alarm Test
WARNING: As with all electronic alarm products you should test your smoke alarm every week. If your WST-630 is interlinked with other smoke alarms, we recommend that every individual smoke alarm is tested during the weekly test. a) Briefly press the test button in the centre of the smoke alarm and release. - Page 15 If your smoke alarm activates and alarms and you are not absolutely certain of the source of the smoke, get everyone out of the house immediately. If your WST-630 is interlinked with other 2. Your alarm will silence and enter into a alarms, pressing...
-
Page 16: Routine Maintenance
• If you have made a family escape plan section ‘Alarm Test’ on page 12. Any test and practiced it with your family, you failures should be reported to the FireAngel have increased their chances of escaping Technical Support Team see page 18. -
Page 17: Repair
‘Troubleshooting’. If you cannot solve the problem, please call the FireAngel Technical • Notify every member in the household. Support Line see page 18. If your FireAngel • Get out of the house as quickly as possible. smoke alarm is no longer under warranty, Follow a planned escape route. -
Page 18: Troubleshooting
Undue force may result in damage to the smoke alarm or the mounting plate or both. For more information contact your installer, or contact FireAngel Technical Support Team between 9am - 5pm Monday – Friday. Telephone: 0800 141 2561 or e-mail: technicalsupport@fireangel.co.uk... - Page 19 Problem Solution Your FireAngel smoke alarm • Check the location of your smoke alarm (see ‘Application chirps intermittently & Positioning’) • Check that your smoke alarm is definitely the source of chirping; make sure the noise isn’t coming from another alarm (smoke/carbon monoxide/burglar/gas alarm) by process of elimination.
- Page 20 4 minutes. Vacate property if there is a fire hazard. You experience frequent Check the location of your FireAngel smoke alarm (see the unwanted alarms section on ‘Positioning’) • Clean the smoke alarm (see the section on ‘Routine Maintenance’)
-
Page 21: Disposal
• Store flammable materials in proper should be removed from the building and you containers. Never use them near an open should contact FireAngel Technical Support flame or sparks. on 0800 141 2561 or technicalsupport@ • Keep electrical appliances and wiring in fireangel.co.uk... - Page 22 Carbon Monoxide alarms in your home. • If there are small children to consider it See www.fireangel.co.uk for further is important to explain to them what the information smoke alarm signal means. Teach them that they must be prepared to leave the home by themselves if necessary.
-
Page 23: Warranty
The warranty on any replacement WST-630 cost or expense relating to this product or for alarm, will last for the remainder of the period... -
Page 24: Returns
PRODUCT RANGE We recommend that you contact the FireAngel Ltd. manufactures an extensive FireAngel Technical Support Line in the first range of home safety products including instance on 0800 141 2561, text phone users smoke alarms, carbon monoxide alarms, fire dial 18001 0800 141 2561 or callers from extinguishers and remote sounding devices. -
Page 25: Notes
NOTES... - Page 26 EN 301489-1 v1.6.1 (2005-09) Smoke alarm devices EN 301489-3 v1.4.1 (2002-08) EN 300220-2 v2.3.2 (2010-12) EN 14604:2005 WST-630 GN1794 / R2 A Sprue Safety Products Brand Sprue Safety Products Ltd. 651d/12 Vanguard Centre, Sir William Lyons Road, Coventry CV4 7EZ UK...