FireAngel WST-630 Quick Start Manual

Hide thumbs Also See for WST-630:

Download this manual

FireAngel WST-630

If you are having trouble with your your FireAngel WST-630 please use our helpful

troubleshooting videos and guides.

Nuisance Alarms My FireAngel WST-630 alarms for no reason Intermittent Chirping My

FireAngel WST-630 is making a chirping noise Where to Install? Where can I install my

FireAngel WST-630? Replacement Date How do I know when to replace my WST-630?

Nuisance Alarms

A smoke alarm sounding for no reason can be both disconcerting and frustrating. FireAngel

smoke alarms are manufactured to the highest standards to minimise the chances of nuisance

alarms.

The FireAngel WST-630 features a Thermoptek® sensor which is proven to be less prone to

nuisance alarms as a result of cooking and it often referred to as 'toast-proof'. However if your

WST-630 smoke alarm does happen to trigger and you are certain there is no smoke present, try

taking the following steps.

If your WST-630 smoke alarm is interlinked with other smoke/heat alarms, all connected alarms

will trigger when one alarm senses smoke or false alarms.

The LED light on the alarm that triggered will flash once per second while sounding 2 cycles of

3 loud beeps. On connected alarms, the LED will flash once every 45 seconds while sounding 2

cycles of 3 loud beeps.

Do you have a question about the WST-630 and is the answer not in the manual?

Page 1 The FireAngel WST-630 features a Thermoptek® sensor which is proven to be less prone to nuisance alarms as a result of cooking and it often referred to as 'toast-proof'. However if your WST-630 smoke alarm does happen to trigger and you are certain there is no smoke present, try taking the following steps.
Page 2 2. Silence the Alarm If you are confident that your alarm has activated without the presence of fire, press the silence button in the middle of the alarm. This will put the unit into reduced sensitivity mode for 10 minutes. During this period of reduced sensitivity your alarm(s) will still detect smoke and will override the smart silence feature if high levels of smoke or heat reach their sensors.