Step 16, Secure Dishwasher; To Countertop Or Cabinet; Step 17, Connect Water Supply - Monogram ZBD6920D00SS Installation Instructions Manual

Installation Instructions
STEP 16 SECURE DISHWASHER TO
COUNTERTOP OR CABINET
In this step you will
need the 2 Phillips
special-head screws
set aside
in
Step
1.
The dishwasher
must be secured to
the countertop or
Co unt e rto p_--_""--->d_-_._
Mounting \, ./_'%/-_1
Brackets pj_
.u_ q/h iu_ IIII I Brackets
_rame_iH i IIIII _l
Figure AA
the cabinet sides. When countertops are made of
wood, use Method 1. When countertops are granite
or other materials that will not accept screws, use
Method 2 to secure dishwasher at the sides.
IMPORTANT-
Avoid unnecessary
service charges.Drivescrews straight a nd flush.
Protruding screw heads will scratchthe top or
sidesof the
Brackets Wood
Countertop
control panel /
and can
interfere with
door closing.
Screws
Method 1-- FigureBB
Secure dishwasher to wood
countertop
• Fasten the dishwasher to the underside of the
countertop with 2 Phillips special-head screws
provided.
Method 2--Secure dishwasher with side-mounting
brackets
• Remove plug buttons (one on each side).
• Install screws through the dishwasher side mount
bracket and into the adjacent cabinet on each
side. Reinstall
Stone Countertop Side Mounting Brackets
plug buttons.
Either Method--
Make certain
112" gap
minimum
Screws
is maintained. FigureCC
• When step is complete, close dishwasher door
and verify that gap between countertop and top
of dishwasher door is at least 1/2".
Countertop
/
/
Dishwasher Door
12
STEP 17 CONNECT WATER SUPPLY
Connect water supply line to 90 ° elbow.
• Slide compression nut, then ferrule over end of
water line.
• Insert water line into 90 ° elbow.
• Slide ferrule against elbow and secure with
compression nut.
IMPORTANT-check
to be surethat
door springdoes not rub or contactthe fill hose
or water supply line. Test by opening and closing
the door.Reroutethe lines if a rubbing noiseor
interference occurs.
i
Door Spring
Figure EE
90 ° Elbow