Table of Contents
Advertisement
3. Local Video output (BNC port)
The Network Camera also provides composite video output. User can use BNC video cable to
connect the Network Camera with a TV monitor or VCR.
4. DC-in Jack
The input power is 12VDC. Note that supply the power to the Network Camera with standard
power adapter included in package. Otherwise, the improper power adapter may damage the unit
and result in danger.
5. Line in (audio in)
Connect an audio input source to the ICA-530.
6. Line out (audio out)
Connect a loud speaker to the ICA-530. This function is for voice alerting and two-way audio.
2.3 Hardware Installation
1. Drill 20mm (3/4") holes in the ceiling or wall and then align the mounting plate to the holes you
have made as below.
2. Camera Adjustment:
Tilting View
o
Angle range is 0
~180
3. Connect the necessary cables and connectors, for examples, Ethernet cable and power jack.
4. Done.
Ceiling Top Plate
Rotating View
o
Angle range is 0
9/68
Directly
install
on
horizontal or vertical surface
o
o
~360
Angle range is 0
any
Panning View
o
o
~360
Advertisement
Table of Contents
