Camera; Common - Planet ICA-530 User Manual

3.6 Camera

Use this menu to set the function of the camera of ICA-530

3.6.1 Common

PTZ protocol type: The Network Camera is connected to built-in ICA-530 and controls this
device thru RS485 bus. It has three protocols that include Pelco-D, Pelco-P and K-ZM23S1N.
Pelco-D is default protocol.
Move speed: Moving speed of P/T control. User need to set value properly.
Baud rate: This is the communication speed between network module and ICA-530. Note that
please DO NOT changes the default value except on special purpose. If so, user needs to
check and set value properly for both sides.
Camera ID: This is the camera ID set in speed dome camera. Note that please DO NOT
changes the default value except on special purpose. If so, user needs to check and set value
properly for both sides.
38/68