Power Requirements - Raven 210LB Setup And Operation Manual

Portable navigational aid systems
Table of Contents

Advertisement

General setup items to note:
1. The antenna is waterproof but the 210-WiFi, the 210LB, and the computer are not
waterproof.
2. The 210LB/Battery is waterproof, and is intended to be operated outdoors in order to
reduce the antenna cable length.
3. It usually takes less than 5 minutes to install or remove the Raven Portable Navigation
Aid System.
4. Even though the Raven system shows remote AIS and SEND vessels (see SEND/AIS
Operation Manual), the pilot's visual lookout and the RADAR are as critical as ever in
knowing the positions of other vessels.

4 Power Requirements

Only use 100-240 VAC power (use provided adapter if necessary) for the laptop computer, the DGPS
unit, or the WPI.
Figure 2: DC Outlet; Do Not Use with Raven System Equipment
Navigation Aid System Setup and Operation Manual
IMPORTANT
Do not connect any device in the Raven system to a
DC power outlet, such as the one in the photograph
below. DC voltage will damage the Raven devices.
Page 6 of 21

Advertisement

Table of Contents
loading

This manual is also suitable for:

210lb/battery210-wifi

Table of Contents