General Pack-Up Steps - Raven 210LB Setup And Operation Manual

9.2

General Pack-Up Steps

Pack up the system in reverse set up order. It is very important that the power supply be unplugged
before any other wires are disconnected. In general:
1. Shut down the computer.
2. Unplug the computer.
3. Turn off, disconnect, and pack the BPI.
4. Pack the GPS unit.
5. Do not store the computer in a very hot or cold location. Do not leave the computer in a car trunk
over night.
Navigation Aid System Setup and Operation Manual
Page 17 of 21