Hardware Setup External Version; Jumper Setup; Fig.3.3. Tintoretto Internal Board - Digicom Tintoretto User Manual

Description
3.3.

HARDWARE SETUP EXTERNAL VERSION

Inside Tintoretto is present a four position dip switch and some jumper berg for the hardware
setup.

3.3.1. JUMPER SETUP

JUMPER POSITION
U1
U1
U2
U2
U13 to U19
U48 to U49
Normally it is not neccessary modify the default predisposition of the jumpers.
LINE
1
U1
1
U2

Fig.3.3. Tintoretto Internal Board

DESCRIPTION
1-2 Transmit Termination 100 ohm
2-3 The transmission channel is in high impedence
1-2 Receive Termination 100 ohm
2-3 The receive channel is in high impedence
1-2 The serial interface is V.24 (RS232)
2-3 The serial interface is V.35
1-2 The serial interface is V.24 (RS232)
2-3 The serial interface is V.35
3.2
DEFAULT
RS232
PWR