Your modem is installed and ready to make the first connection.
2.2.2. WINDOWS 95/NT4.0 PC CARD VERSION
The installation of the driver for the PC Card (PCMCIA) is a little bit different for WIN95 release
4.00.950 or 4.00.950A or 4.00.950B. In this section is described the procedure for NT4.0 and
WIN95 version 4.00.950B. If you have different WIN95 release or a totaly different OS, please
take the correct information from the Floppy Disk or the CDROM packaged with the modem.
1. Run Windows95/NT4.0
2. Select from the START icon: Settings-Controll Pannel- Modem- Add. From the new window select
Modem PCMCIA and then click Next.
3. Insert the PC Card into the PCMCIA slot of your PC paying attention insert the card the correct
way up (see the indication on the PC Card sticker).
4. Insert the Floppy disk or the CD ROM in the drive and from the window: Install from disk check
that the correct driver letter appears where your Floppy/CD ROM is inserted (eg. A or D), then
click the button Finish.
Your modem is installed and ready to make the first connection.
2.5
Installation