Table of Contents
Advertisement
2.
INSTALLATION
2.1.
HARDWARE INSTALLATION
See the following picture to connect
your modem to the COM port of your
PC or Router and the ISDN cable to
the BRI socket.
See the following picture to connect
your modem to the GEO port of your
Macintosh and the ISDN cable to the BRI
socket.
2.2.
SOFTWARE INSTALLATION
WINDOWS 95/NT4.0 DRIVER
Before starting with the software installation, please read the file Readme.txt present on the
Floppy Disk or the CD ROM included with the modem package. In this file you can read more
details about the driver installation for the different versions of Windows 95 and also the latest
release notes or driver upgrades not available at the time of printing this manual.
MACINTOSH Driver ARA/Open Transport
Make a copy of the SNM70 driver file from the Floppy Disk or the CD ROM to your hard disk
in the folder Modem Script (System Folder- Extension-Modem Script).
Your SNM 70 driver is present in the modem list and available for any application that uses
ARA/Open Transport.
Remember to select the correct communication port in the application in accordance with the
hardware installation.
OTHER DRIVERS
For other Operating Systems, see the installation procedures on the Floppy Disk or the CD
ROM included with the modem package.
After the cable installation, connect the power cord to the
main power supply outlet and switch ON the power switch
on the rear panel. Check that the green LED PWR
indicator light is on.
For the next step see the section Software Installation.
2.1
Installation
Advertisement
Table of Contents
