Hardware Installation - Digicom Tiziano 56 Memory User Manual

TIZIANO 56 MEMORY
2. INSTALLATION
2.1.

HARDWARE INSTALLATION

Check the modem is OK after you removed it from the package.
Use the universal
cable in the
package to
connect the
modem to anyone
of the computer
serial ports.
Connect the modem to
the telephone line through the
cable supplied.
If you work with a Macintosh® connect the serial
cable to the "Modem port" or to the "Printer port".
Go on with the installation reading the SOFTWARE INSTALLATION section.
After you carried out the serial ports and the
telephone line connections connect the modem to
the external power supply and switch ON the power
switch on the rear panel.
2.1
Installation
Check that the LED PWR
indicator is on.