Digicom Tintoretto User Manual page 28

Description
S1 RING count
Number of ring in a period of 8 seconds.
Value Unit
0 RING
1-5 RING
Default=0
S2 ESCAPE sequence character
Value Unit
0-127 ASCII
Default=43
S3 CARRIAGE RETURN character
Value Unit
0-127 ASCII
Default=13
S4 LINE FEED character
Value Unit
127 ASCII
Default=10
S5 BACKSPACE character
Value Unit
0-127 ASCII
Default=8
S7 Wait time for connection
Value Unit
0-255 sec.
Default=25
S12 Escape prompt delay
Value Unit
0 ms
0-255 20ms
Default=50
Function
No ring in a period of 8 seconds
RING count
Function
Contain the ESCAPE sequence character. If the value is greater then 127, escape sequence
is disabled.
Function
Contain the CARRIAGE RETURN character
Function
Contain the LINE FEED character
Function
Contain the BACK SPACE character
Function
In originate maximum amount of time to wait between end of dialing and the connection.
Function
No escape prompt delay
Define escape prompt delay before, during, and after the ESCAPE sequence, so that the
escape sequence can be valid.
3.18
Type:Non Storable
Type:Storable
Type:Non-storable
Type:Non-storable
Type:Non-storable
Typr:Storable
Type:Storable