Installing The Cooktop - GE CP350 Installation Instructions Manual

Installation Instructions
INSTALLING THE COOKTOP
INSTALLING THE JUNCTION BOX
Install an approved junction box where it will be
easily reached through the front of the cabinet
where the cooktop will be located. The cooktop
conduit is 3 feet long.
_C
Install junction box so that
it can be reached through
the front of the cabinet.
]
t
16"
Min.
2_
A IMPORTANT:
The junction box must be
locatedwhere itwill allow considerableslackin
the conduit forserviceability.
E_ PROTECT SURFACE OF COOKTOP
Placea towel or tablecloth onto the countertop.
Lay the cooktop upside down onto the protected
surface.
Bottom of Cooktop
Cloth under Cooktop
[_ ATTACH FOAM TAPE
Apply the foam tape around the outer edge of the
glass. Do not overlap the foam tape.
Bottom of Cooktop
-_. _ '---. .......... z-;_ .........
Note: On CP350S, PP912S, PP932S, PP942S, PP944S,
PP945S & PP950S models, apply the foam tape
around the outer edge of the glass on the sides and
rear of the unit only.
LOCATE MOUNTING PARTS
Remove the hold down brackets and screws from
the literature package.
Mounting Screw
FsI ATTACH BRACKETS TO COOKTOP
Screw the hold down bracket to the side
of the cooktop unit. Repeat for opposite side of
cooktop.
Cooktop Gloss
Hold Down
Bracket