Honeywell TrueSTEAM HM506 Installation Manual page 41

TrueSTEAlVl Wired to a Thermostat in a Zoned Application
A
Optional Air
Proving Switch
C
HUM
HUM
VisionPro IAQ
z:L If air proving switch is used, set
TrueSTEAM DIP 4 down and DIP 5 up.
z£ Connect the thermostats, dampers,
transformers, and sensor wires as shown
in the Truezone HZ432 panel instructions.
A In VisionPRO IAQ installer setup, set ISU
#0374 to 3.
Panel
/_ M29639
TrueSTEAlVl RedLINK Connection in a Zoned Application
C
A
Optional Air
Proving Switch
R
W
Y
Panel
THM4000R
Wireless Adapter
A (TrueSTEAM to Prestige)
A
A
" A
Zones
2-4
THM4000R
Wireless Adapter
(Zones to FocusPRO and/or Prestige)
M29640
z:L If air proving switch is used, set
TrueSTEAM DIP 4 down and DIP 5 up.
Connect the thermostats, dampers,
transformers, and sensor wires as shown
in the Truezone HZ432 panel instructions.
A In Prestige installer setup, program
humidity calls to "Humidify Independent
of Fan."
z_ One Truezone HZ432 panel with
a RedLINK adapter will wirelessly
communicate with 3 additional zones with
RedLINK thermostats.
TrueSTEAM Humidification System 69-2285EF--01 39