BLADEZ BF 635 HRP Owner's Manual page 15

WORKOUT PROGRAM DETAILS CONTINUED
PROGRAM (P-08) SET UP
P-08 (HRC – Heart Rate Program) set up:
1. Press MODE key ~ Program level P-01 light will be flashing.
2. Select P-08 programs with the keys.
3. Press ENTER ~ Age will be flashing.
4. Adjust the Age with the keys.
5. Press ENTER ~ Pulse will be flashing.
6. Adjust the Pulse with the keys.
7. Press ENTER ~ Time will be flashing.
8. Adjust the Time with the keys.
9. Press START
CUSTOM PROGRAMS (P-09 and P-10 only) SET UP
1. Press MODE key ~ Program level P-01 light will be flashing.
Note: If you just power up, please refer to QUICK START (steps 1 – 4)
2. Adjust the programs with the keys to select P-09 or P-10.
3. Press ENTER ~ Time will be flashing.
4. Adjust time with the keys.
5. Press ENTER ~ Display will show SE01 (Segment #1).
6. Adjust the speed of this segment with the keys.
7. Adjust the incline of this segment with the keys.
8. Press ENTER ~ Display will show SE02 (Segment #2).
9. Repeat steps 8 and 9 for up to SE30 (30 segments)
10. Press START at lower console at any time to end.
Custom programs will be stored in the system for easy retrieval unless
you go in and re-program the segments of the custom program.
Note: You can program up to 30 exercise level segments; however, you can
stop at any segment at your desire. The segment you end to segment 30 will
be run at default incline and speed of 0% and 0.5 MPH respectively.
However, you can edit the program at the segment you are currently on and
the built-in software will automatically adjust the rest of the programs
proportionally.
14
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com • Phone 949-206-0330 • Fax 949-206-0350