Advertisement
Quick Links
Helpful
Hints - Quick Reference
Make
},our installation
even
easier.
Use
the
enclosed
adapter
brackets
and block-off
panel
for upflow
or downflow
furnace
installations.
CUT
HAZARD
Failure to follow
this caution
may result in personal
injury.
Sheet metal parts may have sharp edges or burrs. Use care and
wear
appropriate
protective
clothing
and
gloves
when
handling
these parts.
Slip these adapter
brackets
over the inner side flanges
of your Electronic Air Cleaner
foran exact and sturdy fit to
your furnace.
(Trim the ends
at perforations,
if required.)
i
Slip Block-Off
Panel over
front
flange
(here) and trim
panel
at perforations
for an exact
fit to furnace.
Fig. 1 - Block-Off
Panel
Assembly
AO7930
Copyright
2007 CAC / BDP •
7310 W. Morris St. •
indianapolis,
iN 46231
Printed in U.SA
Edition
Date:
t 2/07
Catalog
No: I#- SSEAOB-
01
Manufacturer
reserves
the right to change_ at any time_ specifications
and designs
without notice and without obligations.
Replaces:
NEW
Advertisement
Need help?
Do you have a question about the EACB0020 and is the answer not in the manual?
Questions and answers
Air cleaner seems not to be powering on
The Carrier EACB0020 air cleaner may not be powering on due to several possible reasons:
1. Airflow Sensor Dependency – The unit relies on an airflow sensor to detect air movement before turning on. If there is no air movement in the duct, the air cleaner will not activate.
2. Power Supply Issues – The unit must be plugged into an acceptable power receptacle. Ensure the power cord is properly connected.
3. Blower Motor Connection – The air cleaner cannot be powered directly from blower motor leads. Incorrect wiring may prevent it from turning on.
4. Electromagnetic Interference – High electromagnetic field voltages from the blower motor could be affecting the unit’s operation.
5. Door Not Properly Closed – The unit door must be securely placed on the front of the air cleaner for proper operation.
6. Faulty Components – If the lights turn on briefly and then off, there may be an issue with the power supply or internal components.
Checking these factors can help diagnose why the unit is not powering on.
This answer is automatically generated