Signal Flow And Lake® Processing; Signal Flow; Level Adjustments & Mute Points - Lab.gruppen PLM Series Operation Manual

6. Signal Flow and Lake
6.1

Signal Flow

The figures below depict the audio signal flow for a PLM Series device. It is worth noting that this sophis-
ticated device provides seven points in the signal chain where the signal level can be adjusted, muted or
disconnected. The blue sections represent Frame data, and the red sections represent Module data - please
refer to the Lake Controller Operation Manual for further information.
Important information regarding correct setting of the gain structure can be found in section 10.3.
6.2 Level Adjustments & Mute Points
The numbers below correspond the points identified in Figure 6-1 and Figure 6-2.
Input Router Stage
Input Mixer Stage
Module Input Stage
Figure 6-1: Signal Flow Diagram (PLM Series Part 1)
- Input selection and MUTE
- Router ON/OFF connection to mixer and gain settings
- Mute (N/A for LM Series Mesa Mode) and gain settings
Signal Flow and Lake® Processing
Processing
®
PLM Series Operation Manual Rev 1.3.5
25