Warranty - Lab.gruppen PLM Series Operation Manual

14 WARRANTY

General
This product is manufactured by Lab.gruppen, and it
is warranted to be free from any defects caused by
components or factory workmanship, under normal
use and service, for a period of six (6) years from
date of purchase from an authorized Lab.gruppen
dealer.
If the product fails to perform as specified during the
warranty period, Lab.gruppen will undertake to repair,
or at its option, replace this product at no charge to
its owner, provided the unit is returned undamaged,
shipping prepaid, to an authorized service facility or
to the factory.
This warranty shall be null and void if the product is
subjected to: repair work or alteration by a person
other than those authorized by us; mechanical
damage including shipping accidents; war, civil
insurrection, misuse, abuse, operation with incorrect AC
voltage; incorrect connections or accessories;
operation with faulty associated equipment; or
exposure to inclement weather conditions. Damage
due to normal wear and tear is not covered by the
warranty. Units on which the serial number has been
removed or defaced will not be eligible for warranty
service.
Lab.gruppen shall not be responsible for any
incidental or consequential damages. Lab.gruppen's
responsibility is limited to the product itself.
Lab.gruppen takes no responsibility for any loss due
to cancellation of any events, or rent of replacement
equipment or costs due to a third party's or customer's
loss of profit, or any other indirect cost or losses
however incurred.
Lab.gruppen reserves the right to make changes or
improvements in design or manufacturing without
assuming any obligation to change or improve
products previously manufactured.
This warranty is exclusive, and no other warranty is
expressed or implied. This warranty does not affect
the customer's statutory rights.
International warranties
Please contact your supplier or distributor for this
information, as rights and disclaimers may vary from
country to country.
74 PLM Series Operation Manual
Technical assistance and service
International
If your Lab.gruppen product requires repair, contact
your Lab.gruppen dealer or distributor, or contact
Lab.gruppen by fax or email to obtain the location
of the nearest authorized service centre.
Factory service
In the event Lab.gruppen product requires factory
service, you may contact Lab.gruppen's service
department for return instructions and a Return
Authorization number.
Please note for product return:
1. Use the original packing.
2. Include a copy of the sales receipt, your name,
return address, phone and fax number, email
address and description of the defect.
3. Mark the Return Authorization number on the
outside of the packing.
4. Ship the product prepaid to:
Lab.gruppen AB
Faktorvägen 1
SE-434 37 Kungsbacka
SWEDEN
Phone: +46 300 56 28 00
Fax: +46 300 56 28 99
plmsupport@labgruppen.com
info@labgruppen.com
www.labgruppen.com
Intercooler and Class TD are national and/or
international registered trademarks of Lab.gruppen
AB. PLM, Powered Loudspeaker Management,
R.SMPS, LoadLibrary, LoadSmart, SpeakerSafe and
ISVPL are trademarks of Lab.gruppen AB.
Dolby, Lake, and the double-D symbol are registered
trademarks of Dolby Laboratories. Dolby Lake
Processor, Lake Contour, Lake Mesa Quad EQ,
LimiterMax and Iso-Float are trademarks of Dolby
Laboratories.
All other trademarks remain the property of their
respective owners. Copyright © 2008 Lab.gruppen
AB. All rights reserved.