Assembly Process
1.
Pass power cable through Sealing nuts, gasket and clamp ring (item 2~5)
2.
Solder the power pin as pin definition above.
3.
Seal all connectors and fasten sealing nuts to secure IP67 waterproof function.
2.2.2.2
Installation of PoE port
The PoE port is an M25 cable gland connector which provides IP67 waterproof capa-
bility. This PoE port let user connect to IEEE 802.3at PoE injector or PoE switches.
While connecting power through external DC power sources, this PoE port is used as
data port and user should connect to switches or PC/ Notebook for data access.
Assembly Process
1.
Withdraw the M25 cover from enclosure of EKI-6340
EKI-6340 Series User Manual
10