Wireless; Wireless > Radio Setup - Advantech EKI-6340 Series User Manual

3.3

Wireless

3.3.1 Wireless > Radio Setup
Wireless Band: Choose a radio frequency for signal transmission. The frequency
and channel bandwidth match to selection is showed as following table:
Selection
802.11G
802.11NG HT20
802.11NG HT40 Plus
802.11NG HT40 Minus
802.11A
802.11NA HT20
802.11NA HT40 Plus
802.11NA HT40 Minus
Note! The operating band should be selected by the restriction to local wire-
less regulation of each region or country.
Channel: Available channel is related to what wireless band is chosen.
Note! Do not set all radios in the same RF channel. This will cause system
interruption and unstable RF operation.
Transmission Power: Control the transmit power of a radio by selection of Trans-
mission Power.
EKI-6340 Series User Manual
Frequency
2.412GHz-2.462 GHz
2.412GHz-2.462 GHz
2.412GHz-2.462 GHz
2.412GHz-2.462 GHz
5.18 GHz- 5.32 GHz
5.50 GHz- 5.58 GHz
5.66 GHz - 5.70 GHz
5.745 GHz - 5.825 GHz
5.18 GHz- 5.32 GHz
5.50 GHz- 5.58 GHz
5.66 GHz - 5.70 GHz
5.745 GHz - 5.825 GHz
5.18 GHz- 5.30 GHz
5.50 GHz- 5.54 GHz
5.66 GHz
5.745 GHz - 5.785 GHz
5.20 GHz- 5.32 GHz
5.52 GHz- 5.56 GHz
5.68 GHz
5.765 GHz - 5.805 GHz
22
Channel Band Width
20 MHz
20 MHz
40 MHz
40 MHz
20 MHz
20 MHz
40 MHz
40 MHz