Advantech EKI-6340 Series User Manual page 32

"Access Point (WDS Support)" and "Wireless Station (WDS Support)" are WDS-com-
patible selection for EKI-6340 series to connect with third-party wireless device which
support WDS for interconnection.
Once the "MESH Mode" and "Mobility Mode" was applied, the MESH Setup hyperlink
will be available and other 802.11 WLAN setting will be hidden.
RTS: "Request to send" is the optional mechanism used by the 802.11 wireless net-
working protocols to reduce frame collisions introduced by the hidden node problem.
Set the packet size to trigger RTS/CTS enable. This is normally set in client side only
because the hidden station problem does not exit from the perspective of the AP.
RTS Threshold can be set between 1 and 2312 bytes.
Fragmentation: Set the packet size to activate fragmentation. Fragmentation thresh-
old can be set between 1 and 2312 bytes.
Note! Fragmentation setting will be automatically disabled, once the frame
aggregation is enabled
Limited Data Rate: Limit the wireless data link rate to enhance the stability of data
transmission.
VLAN ID: In order to create a wireless VLAN environment, each virtual AP can con-
form to an 802.1q VLAN tag ID.
VLAN Priority: Each VLAN ID can be given a priority number (from 0 to 7) for data
process priority.
Client Numbers: Limit the maximum number of associate client devices.
Client Isolation: Client isolation will protect the privacy of each connecting client
from searching in a wireless LAN.
Bandwidth Profile: Choose a bandwidth control profile for virtual AP interface.
(About the details of bandwidth profile, please refer to the bandwidth control setup in
coming pages.)
EKI-6340 Series User Manual 24