Replacing Your Locomotive's Lamp - Lionel Rio Grande General Owner's Manual

Maintaining and servicing your set

Replacing your locomotive's lamp

Y
our locomotive is illuminated by one lamp, Lionel part no 6000191300. During the course of
normal operations, the lamp in your locomotive may require replacement. Replacement lamps
are available at your authorized Lionel Service Center or from Lionel Service.
1. As illustrated in Figure 12, remove the screws on the base of the latern housing. Lift away the lan-
tern housing.
2. Slide the lamp back towards the locomotive's stack, then lift the lamp straight up from the brack-
et.
3. Install the replacement lamp, sliding it towards the front of the locomotive.
4. Place the lantern housing down over the lamp and replace the screws.
Lantern
housing
Lionel part
no. 6000191300
Bracket
Figure 12. Lamp replacement
Flat spring
Screws
20