Table of Contents
Advertisement
Operating and servicing your set
REPLACING YOUR LOCOMOTIVE'S LAMP
Y
our locomotive is illuminated by a 14-volt lamp located directly behind the boilerface.
During the course of normal operation, the lamp may require replacement.
1. Swing the boilerface open. See Figure 6.
2. Gently remove the expired bulb and grommet from the headlight housing and remove the
grommet from the bulb.
3. To disconnect the bulb, gently unplug the bulb from the connector.
4. Place the grommet onto the new bulb.
5. Plug the connector on the new bulb into the mating connector.
6. Insert the replacement bulb and grommet into the headlight housing.
7. Close the boilerface.
Figure 6. Headlamp replacement
11
Advertisement
Table of Contents
