Isofix Installation - BESAFE iZi Go Isofix User Manual

ISOfix installation

• It is NOT ALLOWED to mount the seat in a front
!
passenger seat WITH AN ACTIVATED AIRBAG.
• When installed with ISOfix: Make sure the indicators
are green before you drive.
• The floor support must always be used. Make sure that the
floor support is fully pushed down.
1- The insertion clips make the
installation easier. Click the
insertion clips onto the ISOfix
anchorage points on the vehicle
seat (between seat and backrest)
(1). The insertion clips should be
removed when not in use.
2- Release the floor support
from underneath the base.
Do this outside the car (2).
3- Pull the ISOfix release handle to a vertical position (3). Slide the
ISOfix connectors out of the base till the end stop (4).
6
(1)
(2)
(3) (4)
click!
4-
Position the base on the car seat. Click the ISOfix connectors in
the ISOfix points on the vehicle seat. Make sure that both ISOfix
indicators are green (5).
(5)
click!
5- Push the ISOfix release handle down in the base. Push the
ISOfix base as far as possible towards the backrest of the
vehicle seat (6).
1
rrrrrt!
(6)
7