Preparing To Install; Parts; Rearward-Facing Isofix Installation - BESAFE IZI COMBI ISOFIX User Manual

Preparing to install

Crucial parts
Locking bolt floor support
Belt loop floor support
Floor support
ISOfix car anchorage (2x)
ISOfix connectors (2x)
ISOfix insertion clips (2x)
ISOfix release button (2x)
(red/green indicator)
Cap ISOfix connector (2x)
4
Release handle head rest
Belt clamp (2x)
Adjustable head rest
Harness shoulder straps
Harness buckle
Belt tension indicator (if
applicable)
Central adjuster
Front brace
Reclining lever
Belt guiding hook
Ratchet for front brace
Switch for ISOfix
connectors (2x)
Belt hook (2x)
Rearward-facing: ISOfix installation
• It is NOT ALLOWED to mount the seat in a front
passenger seat WITH AN ACTIVATED AIRBAG.
• The seat can only be installed rearward-facing in
vehicles equipped with ISOfix anchorage points.
1-
When mounting in the back seat of the vehicle, push the front
seat of the vehicle forward as much as possible.
When mounting in the front seat of the vehicle, adjust the back
rest in an upright position.
2- Find the ISOfix anchorage
points in the vehicle (1).
3- If your vehicle is not equipped
with ISOfix insertion clips insert
these to make installation easier.
You can find the ISOfix insertion
clips under the base of the seat
or delivered separately with the
seat (2).
4- Remove the caps from the ISOfix
connectors by pressing down the
ISOfix release buttons (3).
!
(1)
(2)
(3)
5 5