Active; Function - Monacor DMR – 450 User Manual

3.7.8.1 Active

Set up Active state. Low/High will be different depend on machine..

3.7.8.2 Function

The following list contains a brief description of each function.
3.7.8.2.1 Direction : IN
• UNUSED:
• ALARM RESET IN:
• RECORD START IN:
• RECORD ON/OFF:
3.7.8.2.2 Direction : OUT
• ALRAM OUT:
• ERROR OUT:
•
RECORD START OUT: HDD of DVR is full, send signal to DVR which is connect with
• DISK FULL:
• RECORD STATUS:
Figure 3-44 Set up AUX port screen
Do not use the AUX port.
Pause alarm or buzzer when event occurred
Record image during user push the button
Recording start/stop during user push the button & same as
pushing remote controller or DVR machine
Notice the assigned port when event occurred
Notice the assigned port when system error occurred
(Mark system error)
AUX port. During receiving recording signal through AUX port,
it can record it and the mode of DVR AUX in port is RECORD
START IN.
If HDD is full, send signal to the AUX port.
Indicate whether it is recording or not
64