alarm recording will be controlled at Post alarm recording time on Event Setup Menu.
(Refer to paragraph 3.3.4)
• Sensor:
pre alarm recording around 2 or 3 second and maintain it until no of sensor input.
Post-alarm recording will be controlled at Post alarm recording time on Event Setup
Menu. (Refer to paragraph 3.3.2)
• Motion + Sensor:
occurrence. The detailed will be referred to previous motion detection & sensor
occurrence.
• Schedule:
recording in advance detailed recording schedule will be referred to paragraph 3.2.4
record schedule.
3.2.3
QUAD Type
3.2.3.1 Resolution
Only 720 x 480 for NTSC (or 720 x 576 for PAL) is used at Quad recording.
3.2.3.2 Quality
Normal, Enhanced Fine, Fine, Super Fine 4 quality level will be selectable for quality mode
at Quad Recording and those are applicable to each channel.
Start to record under sensor input. As same as motion mode, it starts
Start to recording under motion detection or Sensor
This mode supply user defined time and date schedule
Figure 3-8 Quad record setup screen
35