Table of Contents
Advertisement
3.3.3
Alarm Output
3.3.3.1 Sensor
Configure the alarm out on/off activated by the sensor.
3.3.3.2 Motion
Configure the alarm out on/off triggered by the motion detection.
3.3.3.3 Relay Time
Configure the alarm duration time. It can be set up from 1 second to 60 seconds in the unit of
5 seconds.
3.3.4
Post Alarm Record Time
Configure the recording continuation time after starting an event recording. It can be set up
from 10 seconds to 60 seconds in the unit of 10 seconds.
Figure 3-14 Alarm Output Setting:
41
Advertisement
Table of Contents
