Password Setting; Password Apply - Monacor DMR – 450 User Manual

Set up part for system password, related function and application.
This is a part of installation, actual system password, related function and password
application.

3.7.2.1 Password Setting

To change system password:
First, type-in the current password, confirm. Then if it is correct, type-in the new password
twice. If they match, the password has been changed.
Users can use any numeric number from 0~4, combined 6 units.
Password input screen (present, new, confirm, if it is wrong -twice, confirm to change)

3.7.2.2 Password Apply

Determine whether the system password has to be applied to power On/Off. The applicable
features are recording close, enter menu, system off. Users can set up password ON/OFF
for each feature.
Figure 3-36 System password set up
Figure 3-37 Password input screen
58