Setting; Test - Monacor DMR – 450 User Manual

4-channel digital multiplex recorder

Table of Contents

3.1.4.4 RS-485 Setting

Choose from the following to set PTZ RS-485 baud rate: 2400, 4800, 9600, 19200, 38400,

57600, 115200 bps.

Users can test the PTZ control after setting the parameters. After clicking the TEST button,

PTZ control will be available and tested by up/down key. Pan/tilt and Zoom/Focus mode will

be controlled after entering OK key button.

PTZ control speed will be controlled by PLAY button for higher speed or by R-PLAY button

for precision control

Users can access prior menu with PTZ key entering after finishing test.

3.1.4.6 Additional PTZ Menus

Users can access additional PTZ menu after pressing Menu button in the PTZ mode.

- Set Preset: To preset the position of the Pan/Tilt drive. Users can preset 4 positions

- Go to Preset: To move the Pan/Tilt drive to the position preset in Set Preset mode.

Figure 3-5 Additional PTZ Menu

selected by Left/Right buttons and save the preset by pressing OK button.

Table of Contents