parameters of DVR.
5. System parameter->Default value setting: Initialize parameters values.
6. Communication->Network: Communicate data through network.
7. Communication->Serial: Communicate data through serial port (Setting preferable
ComPort)
8. Language:
9. Information: Click to display program version information.
4.6.3
Communication over Network or serial port
Click to open system parameter -> Write to DVR
The below window will be activated on
After Setting system parameters
-
Derive system parameters from DVR
-
Enter assigned network access password for Admin.
communication between DVR using network.
Enter assigned network access password for Admin.
communication between DVR using serial port.
Click to select preferable language
=> Network mode as communication media
=>Serial mode as communication media
After authenticated, users can
After authenticated, users can
111