Basic Operation Procedures; Power On/Off; Power On; Power Off - Monacor DMR – 450 User Manual

2. Basic operation procedures

2.1 Power On/Off

2.1.1

Power on

Using either the keypad or the remote control, press the "Power" button. (Note: In case of
power outage or rare instance of system failure, the DVR will reboot automatically)
The Power LED light will turn from red to green when it has turned on properly.
In a standby mode, the LED is red.
2.1.2

Power OFF

In order to shutdown the system, you must type in the password.
shutdown is "111111".
2.2 Date & time setting
Set the date and time for the DVR.
(System Setup in Main Menu

2.3 Password setting procedure

Select or change your password for the DVR. The password must be a 6-digit number
consisting of numbers 0 ~ 4.
(System Setup in Main Menu

2.4 Network setting

There are three types of network setting for the DVR: Static, DHCP, or PPPoE. Please set
the network type. (Network Setup in Main Menu)

2.5 Recording

Select recording related parameters in the Record Setup in the main menu.
Time/Date)
System Password)
24
The default password for