Alarm - Monacor HDVR-184 User Manual

SMTP server: indicates server address you used.
5.2.4.6 DDNS Set
Picture5-41
Click [Apply] button and restart the DVR; and then enter the domain name (such as:
http://superdvr.3322.org:8080) to visit your remote DVR.

5.2.5 Alarm

5.2.5.1 Motion
Click [Main menu Alarm Motion] to enter into the interface shown as Picture 5-42.
Picture 5-42
Sender address: indicates sender's email address. The
email address should be consistent with the server you use. That
is to say, when you use email address – aaa@gmail.com, the
according server should be smtp.gmail.com.
Receiver address: indicates receiver's email address. The
email address is used to receive image transmitted from DVR
alarm. Please clear the images you have received as soon as
possible to avoid overloading your email account.
Picture 5-38
Server: select DDNS provider
Host name: input the host domain name you
have registered at dynamic domain name
system, such as: DVR2009.3322.org;
User Name: Input a user name registered
before applying for a domain name;
Password: Input a password you set when
registering a user name.
Channel: allow you enable/disable the
motion function for any channel.
Area: Click the [Setup] button to enter
into area setup interface shown as
Picture 5-42.
Sensitivity: allow you to set sensitivity
level of motion detection from higher to
low with 8 being the most sensitive.
Alarm out: allow you connect external
alarm sensor.
27
User Manual