Network And Dial-Up Connections - Opticon H15 User Manual

Network and Dial-up Connections

3.2.14.
ICON
"Connection" Tab
(Figure 3-45 to Figure 3-55)
To create a "Dial-up Connection":
•
Double-tap the "Make New connection".
•
In the "Make New Connection" dialog box, enter a name for the connection.
•
Select "Dial-Up Connection".
•
Select the "Next" button.
•
Select the modem you want use.
•
Select "Configure"
•
Under "Connection Reference", use the default settings provided. If you can't
connect using these settings, see your ISP or network administrator for specific
information. If you want to always enter a phone number before connecting,
Select "Manual Dial". Select "OK".
•
Select "TCP/IP Settings". In the "General" tab, ensure "Use Server-assigned IP
address" is selected. In the "Name Servers" tab, ensure "Use Server-assigned
addresses" is selected, and select "OK". If you are unable to connect with these
default settings, see your ISP or network administrator for specific TCP/IP
information.
•
Select the "Next" button and type the telephone number.
•
Select the "Finish" button.
The connection you just created appears as an icon in the "Network and Dial-up
Connections" folder.
•
Set up a point-to-Point Protocol (PPP) account with an ISP and obtain the
following information:
o Access telephone number
o User name
o Password
•
Once you have established an account, create a new connection on your device.
When creating this connection, you should be able to use all of the default TCP/IP
settings provided in the Make New Connection Wizard. If you can't connect using
the default settings, contact your ISP or access your ISP's Web site for specific
TCP/IP information as well as primary and secondary DNS address.
Modify Connection Setting
•
Select Start > Settings > Network and Dialup Connections
•
Select the icon for connection settings you want to modify.
•
Select File > Properties, or double- tap the appropriate icon.
•
Select desired options. There may be additional settings that depend on the
connection. To modify, select the icon and select the icon and select Advanced
Settings... from the menu.
ITEM & FUNCTION
3-21
Opticon
H15
User Manual