Opticon H15 User Manual page 37

a) Main Tab
•
Enable/Disable
Radio: When the radio is enabled, selecting this button disables it; when the
radio is disabled, selecting this button enables it.
•
Active Profile: You can view the name of the active profile and, using the
selection list, select a different profile. If you select ThirdPartyConfig then,
after the device goes through a power cycle, WZC is used for configuration of
the radio.
•
Status: Indicates the radio's status.
•
Radio Type: Indicates the type of radio in the device. "BG" means a Summit
radio that supports 802.11b and 802.11g.
•
Regulatory Domain: Indicates the regulatory domain or domains for which the
radio is configured. "Worldwide" means that the radio can be used in any
domain. The domain cannot be configured by an administrator or user.
•
Driver: Indicates the version of the device driver that is running on the device.
•
SCU: Indicates the version of SCU that is running on the device.
•
About SCU: When tapped, supplies information on SCU that on a Windows
application normally would appear under Help > About.
Figure 2-12. Main tab
2-30
Opticon
H15
User Manual