Table 41 Advanced> Vpn Transport > Customer Interface; Table 42 Advanced > Vpn Transport > Ethernet Pseudowire - ZyXEL Communications MAX-306 User Manual

Chapter 9 The VPN Transport Screens
The following table describes the icons in this screen.
Table 41 Advanced> VPN Transport > Customer Interface
ICON
The following table describes the labels in this screen.
Table 42 ADVANCED > VPN Transport > Ethernet Pseudowire
LABEL
#
Active
MPLS VC Label
Ingress
Egress
Pseudowire
Description
Action
122
DESCRIPTION
Edit
Click to edit this item.
Delete
Click to delete this item.
DESCRIPTION
The number of the item in this list.
This icon is green if the associated pseudowire is enabled. The
icon is grey if the associated pseudowire is disabled. Enable or
disable a pseudowire by clicking its Edit icon.
This is the MPLS virtual circuit label number for traffic coming
from the peer device.
This is the MPLS virtual circuit label number for traffic going to the
peer device.
This displays the information you previously entered describing
the pseudowire.
Click the Edit icon to set up an Ethernet pseudowire or alter the
configuration of an existing Ethernet pseudowire.
Click the Delete icon to remove an existing Ethernet pseudowire.
User's Guide