The Routing Table List Screen; The Static Route Screen; Figure 32 Advanced Setup > Routing Table List; Figure 33 Advanced > Routing > Static Route - ZyXEL Communications P-660R User Manual

Chapter 9 Static Route

9.2 The Routing Table List Screen

Use this screen to view the static route rules. Click Advanced Setup > Routing to display the
following screen.
Figure 32 Advanced Setup > Routing Table List
The following table describes the labels in this screen.
Table 19 Advanced Setup > Routing Table List
LABEL
#
Dest IP
Mask
Gateway IP
Metric
Device
Use
Edit
Drop
ADD ROUTE

9.2.1 The Static Route Screen

Use this screen to configure the required information for a static route. Select a static route
index number and click Edit, or click the ADD ROUTE button in the Routing Table List
screen. The screen shown next appears.
Figure 33 Advanced > Routing > Static Route
78
DESCRIPTION
This is the number of an individual static route.
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This parameter specifies the IP network subnet mask of the final destination.
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
This field displays the priority of each route on the ZyXEL Device.
This is the name that describes or identifies this route.
This is the number of times the route was used.
Click this to go to the screen where you can set up a static route on the ZyXEL
Device. You cannot edit the default routes.
Click this to remove a static route from the ZyXEL Device. You cannot delete the
default routes.
Click this to add a new static route on the ZyXEL Device.
P-660R-Tx v3 User's Guide