C
H A P T E R
The System Configuration
11.1 Overview
Click ADVANCED > System Configuration to set up general system settings,
change the system mode, change the password, configure the DDNS server
settings, and set the current date and time.
11.1.1 What You Can Do in This Chapter
• The General screen
Device's mode, set up its system name, domain name, idle timeout, and
administrator password.
• The Dynamic DNS screen
WiMAX Device as a dynamic DNS client.
• The Firmware screen
to the WiMAX Device.
• The Configuration screen
restore the configuration of the WiMAX Device.
• The Restart screen
Device from within the web configurator.
11.1.2 What You Need to Know
The following terms and concepts may help as you read through this chapter.
System Name
The System Name is often used for identification purposes. Because some ISPs
check this name you should enter your computer's "Computer Name".
• In Windows 2000: Click Start > Settings > Control Panel and then double-
click the System icon. Select the Network Identification tab and then click
the Properties button. Note the entry for the Computer Name field and enter
it as the System Name.
User's Guide
(Section 11.2 on page
(Section 11.3 on page
(Section 11.4 on page
(Section 11.5 on page
(Section 11.6 on page
143) lets you restart your WiMAX
11
Screens
137) lets you change the WiMAX
138) lets you set up the
140) lets you upload new firmware
142) lets you back up or
135