Before You Begin; Figure 47 Identifying Users - ZyXEL Communications MAX-306 User Manual

When the packets reach the WiMAX Device (D), their source is identified by
examining their VLAN tags.

Figure 47 Identifying Users

A
B

9.1.3 Before You Begin

Before you start configuring your WiMAX Device to use VPN transport, ensure that
you have the following from the service provider:
• The IP address or domain name of the service provider's edge router.
• Virtual circuit (VC) labels for each Ethernet Pseudowire you want to create.
• Also make sure that you know the VLAN IDs (Virtual LAN IDentifiers) of the
VLANs on your LAN.
User's Guide
PORT 1 VLAN 1
PORT 2 VLAN 2
PORT 1
1
C
PORT 2
Chapter 9 The VPN Transport Screens
2
D
115