Customer Interface Setup; Figure 52 Advanced > Vpn Transport > Customer Interface Setup; Table 40 Advanced > Vpn Transport > Customer Interface Setup - ZyXEL Communications MAX-306 User Manual

Chapter 9 The VPN Transport Screens

9.3.4 Customer Interface Setup

Click the Edit icon in the ADVANCED > VPN Transport > Customer Interface
screen to open the Customer Interface Setup.
Customer interfaces map traffic onto specific Ethernet pseudowires for transport
over the WiMAX network. There is also a default customer interface for routing
traffic that does not possess a VLAN tag.
Figure 52 ADVANCED > VPN Transport > Customer Interface Setup
The following table describes the labels in this screen.
Table 40 ADVANCED > VPN Transport > Customer Interface Setup
LABEL
Active
Customer Interface
Type
VLAN ID
Mode
Associated
Ethernet
Pseudowire
120
DESCRIPTION
Select to make this customer interface active. Deselect it to make
the customer interface inactive.
A customer interface can be tagged (controlling traffic that has a
specific VLAN ID) or untagged (controlling traffic without a specific
VLAN ID). There can be only one untagged interface.
Enter the Virtual Local Area Network Identifier number (1 ~ 4094)
for this interface. This VLAN ID must not be used by any other
customer interface.
For the untagged interface, -1 displays.
This displays Bridging or Routing. A tagged interface can operate
in bridging mode only.
Select the Ethernet pseudowire this interface should use for
communications over the WiMAX network. You should configure the
pseudowire (in the ADVANCED > VPN Transport > Ethernet
Pseudowire screen) before you select it.
User's Guide