Chapter 6 The LAN Configuration Screens
6.3 Static DHCP
Click ADVANCED > LAN Configuration > Static DHCP to assign specific IP
addresses to specific computers on the LAN.
Note: This screen has no effect if the DHCP server is not enabled. You can enable it
in ADVANCED > LAN Configuration > DHCP Setup.
Figure 25 ADVANCED > LAN Configuration > Static DHCP
The following table describes the labels in this screen.
Table 20 ADVANCED > LAN Configuration > Static DHCP
LABEL
#
MAC Address
IP Address
Apply
Reset
78
DESCRIPTION
The number of the item in this list.
Enter the MAC address of the computer to which you want the WiMAX
Device to assign the same IP address.
Enter the IP address you want the WiMAX Device to assign to the
computer.
Click to save your changes.
Click to restore your previously saved settings.
User's Guide