Weider Total Body Works 5000 Bench User Manual page 9

STORING THE WEIGHT TRAINING SYSTEM
29
To store the weight training system, detach the
Handlebar (29) from the Top Frame (1), and the Foot
Plate (8) from the Bottom Frame (2), by removing the
17
four L-Pins (17). Next, pull out the indicated Knob (58)
8
and slide the Bottom Frame as far into the Top Frame
as it will go. Finally, adjust the system to the fully
1
declined position. (See ADJUSTING THE INCLINE, on
page 8.)
17
58
17
2
ATTACHING THE HANDLES
Attach the Handles (34) to the ends of the Cable (32)
with the two Cable Clips (33).
32
33
34
32
33
34
9