Weider Total Body Works 5000 Bench User Manual page 7

5. Attach the Stabiliser (6) to the Adjustment Leg (5)
with three M8 x 52mm Bolts (40), three M8 Black
Zinc Washers (54), and three M8 Black Zinc Nylon
Locknuts (46). Make sure that the head of the
Bolt is in the hexagonal hole in the Stabilizer.
6. Attach an 108mm Eyebolt (31) to the Top Frame (1)
with an M8 Bright Zinc Washer (55) and an M8
Bright Zinc Nylon Locknut (36). Do not overtighten
the Locknut; the Eyebolt must be able to pivot
easily.
Repeat this step on the other side of the Top
Frame (1).
7. Slide a Foam Pad (16) onto each side of the
Handlebar (29).
8. Make sure that all parts have been properly tight-
ened. The use of the remaining parts will be
explained in ADJUSTMENTS, beginning on the
next page.
5
5
6
31
7
16
7
46
54
54
6
40
40
1
31
55
36
29
16