Assembly - Weider Total Body Works 5000 Bench User Manual

ASSEMBLY

Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight training system can be assem-
bled successfully by anyone. Most people find
that by setting aside plenty of time, assembly will
go smoothly.
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• As you assemble the weight training system,
make sure all parts are oriented as shown in the
drawings.
1. Attach the Pulley Guard (59) to the Backrest (4)
with two M6 x 16mm Screws (60) and two M6
Washers (39).
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
Assembly may require the included grease and
the following tools (not included):
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Clear tape or masking tape, and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
4
5
59
39
60