How To Program Performances - General Music WK4 Owner's Manual

How to Program Performances

This section describes some of the most com-
mon changes that can be applied to the Perform-
ances.
Once a Performance has been modified, it can
be saved to RAM by pressing STORE PER-
FORMANCE. Without saving, the modifications
remain temporary and are lost when you select a
different Performance, or reselect the same one.
Note: The changes described in this section
can also be applied to Style-Performances and
Song-Performances .
HOW THE SOUNDS ARE ARRANGED
In default conditions, the Performances recall
factory-set Sound combinations. You can change
one or more Sounds of any Performance and
store the resulting modifications to memory so
that the Performance recalls your preferred
Sound combination when it is selected.
The Sounds are arranged in 16 Groups of 16
banks each. Each bank can contain up 8 Sounds.
The Sounds of Bank 1 are arranged according to
General MIDI standards, while those that reside
in other Banks are variations of the Bank1
Sounds. The table shown opposite lists the
Sound Group names.
4•6 User Guide
Sound Group name
Piano
Chromatic
Organ
Guitar
Bass
Strings
Ensemble
Brass
Reed
Pipe
Synth lead
Synth pad
Synth SFX
Ethnic
Percussive
Special SFX
Sound map
ProgramChange
1 ... 8
9 ... 16
17 ... 24
25 ... 32
33 ... 40
41 ... 48
49 ... 56
57 ... 64
65 ... 72
73 ... 80
81 ... 88
89 ... 96
97 ... 104
105 ... 112
113 ... 120
121 ... 128