Table of Contents
Advertisement
LOAD SINGLE BLOCK
Use «Load Single Block» to rewrite the entire con-
tents of RAM. Block data contains: Sounds, Per-
formances, Style Performances, User Styles (and
relative Performances), Songs (and relative Per-
formances) and a Setup file.
1. Select SINGLE BLOCK from the main Load page
then press ENTER to gain access to the FILE SE-
LECTOR.
2. Select the BLOCK to load then press ENTER twice
to load into RAM.
The "RAMFILE" shown at the destination is
replaced by the new file with the same iden-
tity (1 RAMFILE.BLK).
The Demo Disk supplied with the instrument
contains a Block file with the name
"AUTOLOAD.BLK" which is loaded automati-
cally to RAM when you turn on the instru-
ment with the disk inserted in the drive.
1
2
Disk 6•9
Advertisement
Table of Contents
