Table of Contents
Advertisement
SELECTING SONGS
To select a Song, send a Bank Select (CC00)
and Program Change (PC) message to WK4 with
the values shown in the following table.
The messages travel on the Common Chan-
nel only.
Values CC00 / PC
55 / 1-16
SELECTING THE SONG-PERFORMANCES
To select one of the Performances of the current
Song, send a Bank Select (CC00) and Program
Change (PC) message to WK4 with the values
shown in the following table. Before selecting a
Song-Performance, select a Song as described
above. The messages travel on the Common
Channel.
Value CC00 / PC
64 / 1-16
8•6 User Guide
Song
1-16
Song-Performance
1-16
CONTROLLING A SONG
To control a Song via remote control, the WK4
MIDI Clock must be set to External.
1. Press MIDI in the EDIT section to enter «Edit
MIDI».
2. Press F4 («General set») to recall the «Gen-
eral settings» page.
3. Set the «MIDI Clock» parameter to External.
4. Press ESCAPE or MIDI to exit «Edit MIDI».
The setting rests in memory after power
down.
The START/STOP (or PLAY and STOP) com-
mand is a standard MIDI message. Press
START/STOP on the master keyboard to start or
stop the WK4 sequencer (when WK4 is set to
MIDI External).
The WK4 sequencer receives and transmits the
Song Position Pointer. From the master key-
board, it is possible to control the song advance
and rewind precisely (with a MIDI resolution of
one 'tic' = 1/24th of a quarter).
Advertisement
Table of Contents
